|
CHEMBON 100% RTV
Silicone sealant is a paste, one component material that
cures to a tough, rubbery solid when exposed to moisture
in the air. Since it will not flow under its own weight,
it can be applied on sidewall joints and surfaces overhead
without sagging, slumping or running off. It will adhere
to clean metal, glass, most types of non-oily wood,
vulcanized silicone rubber, silicone resins, natural and
synthetic fibers, ceramic, paper, as well as many painted
and plastic surfaces. However, paints do not adhere long
term to this product .
Click on
picture to learn more about our revolutionary power can
dispensing technology!
Key Benefits
-
COLORS
This product is available in clear, white, black, blue,
aluminum, hi temp red, translucent white, almond,
bronze, and yellow.
-
TEMPERATURES
Silicone rubber offers both extreme low and high
temperature resistance properties. It remains flexible
to –60 deg C (-75 deg F) and although modulus increases,
does not become brittle. These products will also
withstand high temperatures up to +232 deg C (+450 deg
F) during continuous operation, and up to +260 deg C
(+500 deg F) for short periods. For extreme high
temperatures, RED HI TEMP is recommended. This has a
temperature range of +260 deg C (+500 deg F) for
continuous operation, and +315 deg C (+600 deg F) for
short periods.
-
WEATHERABILITY Because this material is 100% solids and
contains no extenders or plasticizers, shrinkage due to
weathering is negligible. Because of the chemical
makeup, resistance to ultraviolet light and ozone is
excellent.
-
CHEMICAL RESISTANCE
This product offers good resistance to most solvents and
oils, organic and inorganic chemicals; however, it is
not recommended for continuous use with gasoline or fuel
oil. Swelling or degradation may occur with these and
certain other hydrocarbon materials. Chemical
compatibility should be tested for each application
considered.
Applications
-
Adhering auto and
appliance trim, including metal, fabric and
fabric-backed plastics.
-
Bonding
gaskets in heating and refrigeration units
-
Sealing of marine cabins and windows
-
Filleting
and caulking joints in sheet metal stacks, duct work,
and equipment housings.
-
Formed-in-place gaskets for engines, transmissions,
differentials, gear boxes, compressors, pumps and all
types of equipment and machinery
-
Sealing
windows in oven doors and flues on gas appliances,
flanged pipe joints and access doors
-
Anywhere a
tight leakproof seal is required
click here
for the material safety data sheet PDF
|
|
