|
Our Elite Line 100% RTV Silicone
Adhesive / Sealant is a gel-like, one component material
that cures to a tough, rubbery solid when exposed to
moisture in the air. Since it will not flow under it's own
weight, it can be applied on sidewall joints and surfaces
or overhead without sagging, slumping or running off. It
will adhere to clean metal, glass, most types of non-oily
wood, vulcanized silicone rubber, silicone resins, natural
and synthetic fibers, ceramic, paper, as well as many
painted and plastic surfaces.
Key Benefits
COLORS:
ADASEAL INTERNATIONAL, INC. Adhesive / sealant is
available in aluminum, black, bronze, blue, clear, white,
Hi-Temp red, snowy white, biscuit, and light grey.
RESISTANCE TO TEMPERATURE EXTREMES: ADASEAL
INTERNATIONAL, INC. Adhesive / sealant offers both extreme
low and high temperature resistance properties. It
remains flexible to –60 deg. C (-75 deg. F) and although
modulus increases, does not become brittle. These
products will also withstand high temperatures up to +232
deg. C (+400 deg. F) during continuous operation, and up
to +260 deg. C (+500 deg. F) for short periods. Fro
extreme high temperatures of +260 deg. C (+500 deg. F)
continuous operation and +315 deg. C (+600 deg. F) for
short periods, the RED HI-TEMP silicone adhesive / sealant
is recommended.
WEATHERABILITY: ADASEAL INTERNATIONAL, INC. Adhesive /
sealant remains flexible to extreme temperatures. Because
this material is 100% solids and contains no extenders or
plasticizers, shrinkage due to weathering is negligible.
Because of the chemical makeup, resistance to ultraviolet
light and ozone is excellent.
CHEMICAL RESISTANCE: ADASEAL INTERNATIONAL, INC.
Adhesive / sealant offers good resistance to most solvents
and oils, organic and inorganic chemicals; however, it is
not recommended for continuous use with gasoline or fuel
oil. Swelling and degradation may occur with these and
certain other hydrocarbon materials. Chemical
compatibility should be tested for each application
considered.
Applications
-
Adhering
auto and appliance trim, including metal fabric and
fabric-backed plastics
-
Bonding gaskets in heating and refrigeration units
-
Sealing
of marine cabins and windows
-
Filleting and caulking joints in sheet-metal stacks,
duct work and equipment housing
-
Formed-in-place gaskets for engines, transmissions,
differentials, gear boxes, compressors, pumps and all
types of equipment and machinery
-
Sealing windows in oven doors and flues on gas
appliances, flanged pipe joints and access doors
-
Anywhere
a tight leak-proof seal is required
Available colors (by product #):
|
10301 Clear |
10302 White |
10303 Black |
10304 Bronze |
|
10305 Aluminum |
10306 Blue |
10307 Hi-Temp Red |
10308 Almond |
|
10309 Yellow |
10310 Snowy White |
10311 Biscuit |
10312 Light Grey |
click here
for the material safety data sheet PDF
|
|
