10.3 oz Caulking tubes

Our Elite Line 100% RTV Silicone Adhesive / Sealant is a gel-like, one component material that cures to a tough, rubbery solid when exposed to moisture in the air. Since it will not flow under it’s own weight, it can be applied on sidewall joints and surfaces or overhead without sagging, slumping or running off. It will adhere to clean metal, glass, most types of non-oily wood, vulcanized silicone rubber, silicone resins, natural and synthetic fibers, ceramic, paper, as well as many painted and plastic surfaces.

COLORS:

10301 Clear

10302 White

10303 Black

10305 Aluminum

10306 Blue

10307 Hi-Temp Red

10308 Almond

10309 Yellow

10310 Snowy White

10311 Biscuit

10314 Grey

10315 Off White

10302T Translucent White

Datasheets:

Standard Acetoxy_ADASEAL (English)

Standard Acetoxy_ADASEAL (Spanish)

Standard Acetoxy_ADASEAL (French)

FEATURES:

COLORS: ADASEAL INTERNATIONAL, INC. Adhesive / sealant is available in aluminum, black, blue, clear, white, Hi-Temp red, snowy white, biscuit and translucent white.
TEMPERATURES: ADASEAL INTERNATIONAL, INC. Adhesive / sealant offers both extreme low and high temperature resistance properties. It remains flexible to –60 deg. C (-76 deg. F) and although modulus increases, does not become brittle. These products will also withstand high temperatures up to +232° C (+450°F) during continuous operation, and up to 500° intermittent the RED Hi-TEMP silicone adhesive/sealant is recommended.
WEATHERABILITY: ADASEAL INTERNATIONAL, INC. Adhesive / sealant remains flexible to extreme temperatures. Because this material is 100% solids and contains no extenders or plasticizers, shrinkage due to weathering is negligible. Because of the chemical makeup, resistance to ultraviolet light and ozone is excellent.
CHEMICAL RESISTANCE: ADASEAL INTERNATIONAL, INC. Adhesive / sealant offers good resistance to most solvents and oils, organic and inorganic chemicals; however, it is not recommended for continuous use with gasoline or fuel oil. Swelling and degradation may occur with these and certain other hydrocarbon materials. Chemical compatibility should be tested for each application considered.

TYPICAL USES:

Adhering auto and appliance trim, including metal fabric and fabric-backed plastics

Bonding gaskets in heating and refrigeration units

Sealing of marine cabins and windows

Filleting and caulking joints in sheet-metal stacks, duct work and equipment housing

Formed-in-place gaskets for engines, transmissions, differentials, gear boxes, compressors, pumps and all types of equipment and machinery

Sealing windows in oven doors and flues on gas appliances, flanged pipe joints and access doors

Anywhere a tight leak-proof seal is required